To start applying, you may login or register.
Login or register now
Job details
Agricultural Equipment Operators
- Country: United States
- Visa type: H-2A
- Job ID: (Open on offer list)
- Employer name: Confidential
- Employees needed: 12
- E-mail (employer): Confidential
- E-mail (agent): Confidential
- Phone: Confidential
- Agent phone: Confidential
- Working hours per week: 36
- Wage: 16.39 USD / Hour
- Start date: 05/25/2026
- End date: 12/11/2026
- Process date: 03/26/2026 15:24:38
- Submit date: Confidential
- Offer description:
Workers will perform assign duties as instructed by their supervisor. Agriculture Equipment Operator to operate equipment used to harvest crops. Must have the correct type of license required by State and Federals laws, and drivers responsible for transporting workers will be required to have a valid and unexpired Federal Farm Labor Contractor or Federal Farm Labor Contractor Employee Registration with driving authorization. Will be responsible for operating the vehicles used to move crops on the farm. Must be able to safely operate the buses that are used to transport workers to and from work sites. Operate forklifts and equipment used to move supplies and harvesting equipment in the field. Maintain harvest equipment. Must be able to reach, bend and lift items weighing 100 pounds. The alternative work if needed will be to assist with the harvesting and Grove General Maintenance. Tobacco Planting: Workers will carry full tobacco plant trays in order to set tobacco by hand and by machine. When done by hand the worker will walk down the field make a 3 inch hole in the ground, place the plant in the hole, cover the hole firmly and space each hole about 12 inches apart repeatedly throughout the daily shift. When setting tobacco by machine the worker must drop one plant in each cone repeatedly every two seconds without missing a cone. Any cone missed will be then set out by hand. Tobacco Harvesting: Workers will start in a row with the first tobacco plant cutting off the top flower by hand properly without damaging leafs below. The worker must then use both hands in order to remove all the suckers that are in between the tobacco leaf and the stem of the tobacco plant. The worker will walk down his designated row working on every tobacco plant taking no more than 4 to 5 seconds. When this is finished the workers will again walk down the tobacco field on his designated row pulling off the bottom 3 to 5 ripe leafs off of every stock. If the leaf is not ripe you must leave it alone. The worker must stay down moving forward placing each leaf on his side until the worker has no more room and must walk over to unload his bundle of tobacco leafs into the tobacco trailer. Workers will put tobacco leafs in boxes and will take the boxes into the barn, once the tobacco is cured it needs to be sorted and put in bails. Any leafs dropped by the worker must be picked up. The tobacco tractor and trailer will always be in the middle of a group moving forward. The worker must due this process 3 to 4 different period of times as leafs ripen on every stock. Sweet Potato Planting: Workers will select large sweet potato plant from the beds; they will cut the plant and place into a basket. Once the basket is full and tight the process will be done again. The worker must be able to complete three baskets every hour. Workers will then plant sweet potato by machine and by hand. When planting by machine the worker will repeatedly set a plant on the butterfly device that holds the plant. The plant end must stick out of the butterfly device at least 2-3 inches in order to be planted correctly. When done by hand the worker will walk down the field make a 3 inch hole in the ground, place the plant in the hole, cover the hole firmly, and space each hole about 10 inches apart repeatedly throughout the daily shift.